It is possible. Energy loss and flow rate are analyzed in two-dimensional units.

Since the analysis results are limited to 2-dimensional cross-sections, the desired analysis results cannot be obtained if the characteristic flow, for example, the central axis of the stenotic jet is not captured in the cross-section.
On the other hand, it takes less time for acquisition.

Prices vary depending on the type of license. Please contact us to get a quote for your requirements.

It is expected to be available soon as a beta feature in development.

It is available. We will be happy to meet with you online and explain how to install and use it. Please contact us at info@cfd.life.

We will send you information on the recommended imaging methods. Please contact us at info@cfd.life.
We provide support for the all the MRI maker according to recommended imaging methods.

The following conditions are recommended for cardiac imaging:
• Sagital
• Venc is 1.5 ~ 2.0m/s
• 4D Flow and Cine images for segmentation.
• Slice width: 4mm max
• More than 15 phases per cardiac cycle

Minimum:
OS: Windows 10 64 bit (Japanese or English)
Monitor resolution: Full HD (1920 x 1080 pixels) or higher
Interface: Mouse with wheels

Recommended:
CPU: Intel(R) Core(TM) i7-9700 or higher
RAM: 16GB or higher
GPU: NVIDIA GeForce GTX 1660 or higher

Analysis speed is CPU-dependent and less RAM means less stability.
We can also provide you an estimate for a recommended PC.

It is possible. If you have any concern, please tell us and we will check the compatibility. We will adapt the software for a better compatibility with your data.

Our iTFlow is unique in its ability to track and analyze beats without contrast. It can also calculate various hemodynamic indices based on fluid analysis techniques.

Demo and trial versions are available. We will support you in the interpretation of blood flow. In addition to 4D Flow MRI, we also provide comprehensive support for CFD and other methods of blood flow analysis, so please feel free to contact us if you have any technical problems.

It is possible to measure the average, maximum, and minimum values of stress in the measured area by enclosing it on the 3D screen.
It is also possible to draw the WSS in a cardiac cycle change’s graph.

4D Flow MRI data can be analyzed to visualize streamlines and pathlines, assess flow rates, measure cardiac volumes, measure energy loss, and analyze stress on the wall.

It is expected to be available soon as a beta feature in development.

Prices vary depending on the type of license. Please contact us to get a quote for your requirements.

Since the analysis results are limited to 2-dimensional cross-sections, the desired analysis results cannot be obtained if the characteristic flow, for example, the central axis of the stenotic jet is not captured in the cross-section.
On the other hand, it takes less time for acquisition.

It is possible. Energy loss and flow rate are analyzed in two-dimensional units.

It is available. We will be happy to meet with you online and explain how to install and use it. Please contact us at info@cfd.life.

We will send you information on the recommended imaging methods. Please contact us at info@cfd.life.
We provide support for the all the MRI maker according to recommended imaging methods.

The following conditions are recommended for cardiac imaging:
• Sagital
• Venc is 1.5 ~ 2.0m/s
• 4D Flow and Cine images for segmentation.
• Slice width: 4mm max
• More than 15 phases per cardiac cycle

Minimum:
OS: Windows 10 64 bit (Japanese or English)
Monitor resolution: Full HD (1920 x 1080 pixels) or higher
Interface: Mouse with wheels

Recommended:
CPU: Intel(R) Core(TM) i7-9700 or higher
RAM: 16GB or higher
GPU: NVIDIA GeForce GTX 1660 or higher

Analysis speed is CPU-dependent and less RAM means less stability.
We can also provide you an estimate for a recommended PC.

It is possible. If you have any concern, please tell us and we will check the compatibility. We will adapt the software for a better compatibility with your data.

Our iTFlow is unique in its ability to track and analyze beats without contrast. It can also calculate various hemodynamic indices based on fluid analysis techniques.

Demo and trial versions are available. We will support you in the interpretation of blood flow. In addition to 4D Flow MRI, we also provide comprehensive support for CFD and other methods of blood flow analysis, so please feel free to contact us if you have any technical problems.

It is possible to measure the average, maximum, and minimum values of stress in the measured area by enclosing it on the 3D screen.
It is also possible to draw the WSS in a cardiac cycle change’s graph.

4D Flow MRI data can be analyzed to visualize streamlines and pathlines, assess flow rates, measure cardiac volumes, measure energy loss, and analyze stress on the wall.